Description Of The VooPoo Argus Multi-Ohm Replacement Pods - Pack Of 3
VooPoo Argus Multi-Ohm Replacement Pods 3 Pack
VooPoo Argus Multi-Ohm Replacement Pods make changing your Argus Z3 pods surprisingly simple. Instead of buying separate 0.7Ω and 1.0Ω pods, both options come in one cartridge.
With the Argus Z3, all you need to do is remove the pod, turn it through 180 degrees and put it back in. The device recognises the different connection and automatically switches between the two resistance options.
Each pack includes three pods, and each UK cartridge holds 2ml of e-liquid.
One Pod, Two Ways to Vape on the Argus Z3
The Multi-Ohm idea is useful because the two settings feel noticeably different without asking you to change coils or fiddle with wattage.
- 0.7Ω: Gives you the warmer and slightly more open option. This works well if you enjoy a looser MTL draw or want a little more vapour.
- 1.0Ω: Produces a tighter, gentler MTL vape and uses less power, making it a good choice if you prefer a more traditional restricted inhale.
You don’t need to fit a different coil to make the change. Flip the pod around, and the Argus Z3 handles the rest.
Made for the Voopoo Argus Z3
These are the same style of Multi-Ohm pod supplied with the VooPoo Argus Z3 Pod Kit, making them the straightforward replacement when the original cartridge eventually wears out.
That means Z3 owners don’t need to choose between two different replacement pod packs. Each Multi-Ohm cartridge gives you both settings.
Topside Filling
Refilling is done through a topside filling port, so you don’t need to remove a coil or dismantle the cartridge when the e-liquid runs low.
Each UK pod holds 2ml of e-liquid. Open the filling port, add your chosen liquid, close the seal securely, and the pod is ready to go.
If it’s a brand-new pod, wait about five minutes after the first fill before vaping. This lets the e-liquid soak fully into the cotton around the internal coil.
No Separate Coils to Change
The heating element is built into the Argus Multi-Ohm cartridge. That’s useful if you’d rather avoid handling small push-fit or screw-in coils.
Once the pod begins to wear out, replace the complete cartridge. Typical signs include weaker flavour, noticeably less vapour or a burnt taste that remains even when there’s enough e-liquid in the pod.
How long each pod lasts depends on how often you vape, the liquid you use, and your vaping habits, so there isn’t a fixed replacement interval.
iCOSM CODE 2.0 Pod Technology
The Argus Multi-Ohm cartridge uses VOOPOO’s iCOSM CODE 2.0 pod technology. It combines the built-in heating system, internal airflow and leak-resistant cartridge design into one disposable pod.
For everyday use, the key is minimal maintenance. Keep the pod filled, don’t let the coil run dry and replace the cartridge when the flavour starts to drop off.
Which E-Liquid Should I Use?
For the 0.7Ω and 1.0Ω settings used by the Argus Z3, a 50/50 VG/PG e-liquid is an excellent choice. Its thinner consistency wicks efficiently in lower-powered MTL pods and works well with both resistance options.
This makes the pods suitable for a wide selection of standard 10ml e-liquids and nicotine salts.
Thicker 70VG shortfills wouldn’t be our first choice with the Z3. They’re generally intended for lower-resistance coils running at considerably higher power.
Which Resistance Should I Use?
If you’re not sure, there’s no harm in trying both. That’s one of the main advantages of the Multi-Ohm design.
Start with the 1.0Ω setting if you prefer a tighter MTL draw and a gentler vape. Flip the pod to 0.7Ω if you’d like something a little warmer and more open.
You can then use the airflow slider on your Argus Z3 to fine-tune the draw further.
Specifications
- Manufacturer: VOOPOO
- Product: Argus Multi-Ohm Replacement Pods
- Pack Size: 3 pods
- Capacity: 2ml per pod – UK TPD version
- Argus Z3 Resistance Options: 0.7Ω / 1.0Ω
- Resistance Switching: Rotate pod 180 degrees
- Filling: Topside fill
- Coil: Built into pod
- Pod Technology: iCOSM CODE 2.0
- Material: PCTG
- Recommended E-Liquid for Argus Z3: 50/50 VG/PG
- Vaping Style with Argus Z3: MTL / loose MTL
- Compatibility: Argus Z3 and compatible VOOPOO Argus pod devices
What’s Included?
- 3 x VooPoo Argus Multi-Ohm Replacement Pods – 2ml
A Handy Spare for Argus Z3 Users
If you use the Argus Z3 every day, keeping a pack of Multi-Ohm pods around makes sense. There’s no separate coil to hunt down, and you don’t need to decide whether to buy 0.7Ω or 1.0Ω replacements.
Each pod gives you both options. Fill it, fit it one way for 0.7Ω or turn it around for 1.0Ω. It’s a simple idea, but it makes the Z3 considerably more flexible without making it any harder to use.
Frequently Asked Questions (FAQs)
What are VooPoo Argus Multi-Ohm Replacement Pods?
They are refillable replacement cartridges for compatible VOOPOO Argus pod kits. With the Argus Z3, one Multi-Ohm pod gives you both a 0.7Ω and 1.0Ω vaping option.
How many VooPoo Argus Multi-Ohm Pods are in a pack?
Each pack contains three replacement pods.
Do these pods fit the Voopoo Argus Z3?
Yes. The Argus Multi-Ohm Pod is the cartridge supplied with the Argus Z3 and is the correct replacement for the device.
How do I switch between 0.7Ω and 1.0Ω on the Argus Z3?
Remove the pod, rotate it 180 degrees and fit it back into the Z3. The different pod orientation changes between the 0.7Ω and 1.0Ω settings.
Do I need to change the coil?
No. The coil is built permanently into the pod. Once it reaches the end of its usable life, replace the entire cartridge.
